Tag Archives: bare root fruit tree

Fruit Trees: Planting in the Desert

How to Plant a Bare Root Fruit TreeHi Friends!

Here it is, the next post in my fruit tree blog series. Enjoy!

Late January thru mid-February is the best time to plant fruit trees here in the desert. Most fruit trees are dormant this time of year (with the exception of citrus and other evergreen fruit trees) which allows them to be planted with minimal stress during this time period. Leafing out is a sure sign that a fruit tree is well on its way to waking up from its winter slumber leaving it more vulnerable to the stress of planting. Also, the January/February time frame allows newly planted fruit trees plenty of time to get settled into their new home before a couple of huge major stressors enter into their life… our drying spring winds and searing hot summer weather. In my opinion, planting a fruit tree in March, April or May is far from ideal. Fruit trees are definitely awake by this time, the wind and heat are starting to kick up and the chance of planting failure increases exponentially.

In some cases, planting March thru May is your only option. Such is the case with citrus and other evergreen fruit trees which are typically not available until spring when the weather warms due to the tree’s sensitivity to cold. Thus, colder weather is actually a major stressor in their lives.

On the extreme side of things, I shudder when I see people here planting fruit trees in the hottest months of June thru September. I usually smile, give them a pat on the back and wish them good luck. In the majority of cases I’ve seen, the trees just never seem to recover from such a poor start. The growth is usually weak and struggling and the tree rarely ever seems to thrive and achieve its full potential. As with everything in life, there are always exceptions… the one super fruit tree that seems to thrive regardless of what you throw at it. Just don’t expect it.

Some folks like to plant fruit trees here in our desert in the fall. To me, this is a much better option than planting in late spring and summer, but I tend to shy away from this time frame as well. Again, my focus is on minimal stress to the fruit tree and subjecting the tree to potential freezes throughout winter as well as extreme temperature changes (i.e., frigid nights and hot days) may not be optimal. Now if you’re an experienced orchardist and know how to properly protect a fruit tree through extreme weather, than this may be a viable option for you.

Bottom-line is this, stress, to any plant, does not promote health and vigor and can lead to a whole gamut of issues such as disease, pest issues, poor growth, poor yields/fruit, and so on. Our goal in planting fruit trees in our orchard is to provide the least amount of stress throughout not only the planting process, but throughout its entire lifetime as well so the fruit tree can thrive and obtain (and maintain) its full potential.

With that said, here’s a cautionary point I want you to be aware of…

Caution: Avoid Planting Fruit Trees On A Windy Day!

The ideal time to plant a bare root fruit tree is on a cool calm day. Add in a bit of drizzly weather and you have perfection. But since perfection is hard to come by in weather these days, chances are you’ll be dealing with some sort of weather challenge while you plant your new bare root fruit tree. One challenge that is particularly harsh is wind. Wind can really do a number on exposed bare root fruit tree roots (say that three times fast 🙂 ). It only takes a few short minutes of blasting wind to dry out those tender wispy little hair-like roots.  Early on in the process, it’s important these precious little roots (along with the more fibrous roots) are kept healthy and viable as they are so critical to your tree’s health and play such a key role in up taking nutrients, water and interacting with soil life.

On those occasions when you do find yourself having to plant on a windy day, just be sure to keep the roots wet by placing your bare root fruit tree roots in a bucket of fresh water while you’re getting ready to plant them into the ground. Though, avoid soaking the graft union (the joint where the root-stock and the scion have been joined together ~ typically a few inches above the root area). You can also stage your fruit tree somewhere close by so you can easily wet down the roots often to keep them moist. Also, be sure to keep the roots moist throughout the entire planting process as well by wetting down the roots often until you’re able to completely cover them with moist soil.

Seriously folks, do your best and plant when it’s most convenient for you… just be certain to be gentle and attentive to your baby fruit tree’s well-being and you’ll be good to go.

Now, let’s plant those patiently waiting bare root fruit trees!

Tools and Supplies

Here’s a list of tools and supplies you’ll need throughout the planting process.  Gather together all of the supplies you’ll need before you begin planting and be sure to set up everything near your planting site for easy access.

  • Set Aside Two to Three 5-Gallon Buckets Full of 50/50 soil mix (50% forest or green waste compost / 50% native soil) ~  You’ll need these buckets full of soil mix to finish off the planting process and to build up a water well around the base of your fruit tree when you’re all done.
  • 4 to 6-foot long Metal Rebar, 1×1 Wood Stakes, or Metal Landscape Stakes (green plastic coated steel) ~ you’ll need these to help support your baby fruit trees.
  • Hammer or Rubber Mallet ~ to hammer in the support stake
  • 1/4″ to 1/2″ Green Nursery Tape ~ To tie your fruit tree to the support stake (we prefer the 1/4″)
  • Water Hose
  • Shovel
  • A 5-foot to 6-foot long wooden stake ~ to help properly position your tree during the planting process and to level the soil after planting

Amendments (for high brix ~ bionutrient fruit)

Now that you have your tools and supplies set aside, it’s time to focus on gathering the amendments you’ll use to start your bare root fruit trees off on the road to high brix bionutrient (nutrient dense) fruit. That means super slurpy sweet delicious fruit that will make every cell in your body sing with vibrant health!

Be sure to check out Step 5 ~ Kick Start Those Soil Microbes! in my Fruit Trees: How To Prepare Soil For Planting

  • OMRI-Certified Organic Animal or Fish Bone Meal ~ a good source of phosphorus and calcium; you’ll need about 2 cups per fruit tree.
  • A Variety of Rock Dusts ~ Rock dusts are a great source of minerals for our soil and mineral-rich fruit (a.k.a. high brix). Rather than rely on a single source of rock dust, I like to use a mixture for a variety of minerals. In addition to using Azomite (granular or microfine powder works ~ I’m trying the granular product this planting season. It quickly breaks down with water and eliminates the dust-factor). I also love to use microfine Basalt rock & Lignite Ore dust blend, Gaia Green Glacial Rock Dust, and a new rock dust product I’m using this year called Ruby Mountain Stone Flour. As for quantities, I typically use 1 lb of Azomite and 8 ounces of Gaia Green Glacial Rock Dust per fruit tree. I’ll be adding about 8 ounces Basalt rock dust blend and 8 ounces of the Ruby Mountain rock dust, but this is highly optional.  You may want to wait until I’ve had a chance to experiment with it, though I’m sure it’s going to be an awesome addition. Keep in mind that with rock dusts, a little goes a long way. Using too much can cause a chemistry imbalance in your soil. Always be on the safe side and have your soil tested before liberally adding amendments in.
  • Endo mycorrhizae inoculant (Ecto mycorrhizae benefits conifers & oaks)
  • John & Bob’s suite of products ~ You’ll broadcast this on the soil surface AFTER planting.
  • For an extra boost, you can also mix into the top 6-inches of soil (during the planting process) about 1 lb of OMRI-Certified Organic Alaska Humus and/or 1 lb of OMRI-Certified Organic Worm Castings. It’s all good stuff.

Step 1 ~ Let’s Get Planting!

Before you begin planting, make sure you’re prepared to do so. Check out my previous post for more details.

With your planting holes dug, soil and hole prepped, tools and supplies staged nearby, and your bare root fruit trees ready to go, select the first fruit tree to be planted. Grab the fruit tree and place it in a small bucket with just enough fresh water to completely cover the roots and set it close by your planting hole. You can skip the bucket of water if that makes more sense for your situation. Just be certain to keep the roots nice and moist.

Fruit Tree Ready for Planting

Fruit Trees Soaking In WaterPlanting a potted fruit tree?

I prefer to plant bare root fruit trees for optimum tree and orchard health as well as variety selection. Be sure to check out why.

Sometimes containerized fruit trees are our only option. No problem. Rather than placing your tree in a bucket of water to keep its roots moist, which would obviously make a complete muddy mess, make sure your potted fruit tree is well watered the day before planting.  This will allow you to easily remove and handle the tree’s root ball while ensuring the roots are moist and ready to go 🙂

Fruit Tree Hole Ready for PlantingFor those of you who prepared your holes in the fall and completely filled them with the 50/50 soil mix AND have been watering the soil to keep the microbes happy and healthy… stop watering the soil a few days before planting so it will be more workable. Next, dig down about 12″-18″ ~ just enough for the roots to fit comfortably in. Then continue onto the next step below.

Finishing up your holes as we speak? That’s okay, too. After digging the planting hole and mixing up your 50/50 soil mix, fill the hole up to about 12″-18″ from the top with your 50/50 soil mix so that the roots will fit comfortably in. Make certain to water the soil thoroughly as you fill the hole to help the soil settle. Then stop watering when you get close to the 12″-18″ mark. This will make the planting process much easier for you.

Planting Hole for Fruit TreeHow To Plant A Fruit Tree In The Desert

Step 2 ~ Placing Your Fruit Tree

During this step, be prepared to move your bare root fruit tree in and out of the hole while you get the depth and placement exactly where you want it. Remember ~ keep those roots moist while you get the placement “just right”.

How do you know the right planting depth for your fruit tree. With potted fruit trees, it’s easy. Basically, the top of the soil in the pot is your guide ~ it should be level with the top of your ground soil. For a bare root fruit tree, it can be a bit trickier. You’ll need to identify where the previous soil line was.

To do this, simply look carefully at the base of the trunk, below the graft union and just above the roots.  The part of the trunk that was above the soil will be a slightly different color than the part of the trunk that was originally below the soil. Keep in mind that on some specimens the soil line discoloration is clear as day. Others, can have a more subtle marking. I would consider the example in the photo below on the subtle side of things.

Notice the roots in the photo are fairly dark (partly because they’re wet). Then, as you move up the trunk the bark becomes a little lighter. And there, at the indicated blue line, is the soil line discoloration.  Pretty faint, right? As you move past this point, the trunk bark gets lighter yet, then you’re at the graft union. Just do your best ~ if you plant a little above or below the line, the tree will do absolutely fine.

Fruit Tree Graft UnionHubby and I also like to use a long board to help place the fruit tree’s previous soil line level with the surrounding soil. The board helps us to line everything up just perfectly. Works like a charm every time 😀 Bare Root Fruit TreeAt the point you are absolutely certain that the planting depth is right, thoroughly moisten the soil and set your tree in ~ Never plant in a dry hole!  At this stage of the planting process, it’s extremely helpful to have a helper who can hold the tree upright through the first part of the planting process. At least until the tree is securely in place. Your helper can also use the hose to wet down the roots and moisten the planting hole soil for you, too. Some folks like to leave the hose trickling into the hole while they plant. Personally, I like to hand water the soil as we’re filling the planting hole with dirt rather than have the hose in the hole. It allows me to quickly shut off my watering hose nozzle when I need to.

Now, as you begin to position your tree within the planting hole, pay careful attention to the graft union. Newbies tend to focus on situating a tree based on the existing branch position and fail to properly place a fruit tree with a grafted trunk. To protect the graft union, position it away from the damaging hot south sun by facing it due north. This is especially important while the fruit tree is young and unable to protect the graft with its small leaf canopy. Also, you want the graft union a few inches above the soil line (the previous soil line will help you with that). So be careful not to accidentally bury it.

Step 3 ~ Stake The Tree

For the most part, Hubby and I like to stake our are bare root fruit trees at this stage so we can clearly see the roots to avoid damaging them when the stake goes in and to add an endo mycorrhizae inoculant directly to the exposed wet roots. Some folks like to stake their newly planted fruit trees when they are all done planting, but it’s a bit more challenging to dust the roots with the mychorrizae inoculant doing it this way. Do what works best for you. Here’s how we stake our trees…

With the fruit tree held firmly in its final perfect position by a helper (or creatively propped up if you’re planting on your own)..

1) Position and hold your support (i.e., rebar, 1×1 wood stake, plastic covered metal stake) close to your tree’s trunk ~ working safely in and around the tree’s roots

2) Lean the tree slightly away to prevent damage, then

3) Hammer the support securely into place keeping it level straight up and down and left to right ~ otherwise, when you go to secure your tree to the stake it could be cockeyed.

4) Now with the tree trunk up against the support, secure the trunk firmly to the support using green nursery tape. This stuff is pretty stretchy, so a little pulling and tugging while tying will firmly secure your baby fruit tree. Try to avoid tying the tape too tight, but you do want it pretty snug. Your goal is to prevent movement of the roots during acclimate weather, especially during high winds. Strong winds are an annual spring event here in the desert and just so happens to take place at the exact same time your baby fruit trees are getting established in your newly formed orchard.  Why is it so important to prevent root movement during this critical time in your fruit tree’s growth cycle? Simply put, a loose tree can rock back and forth causing the soil to dislodge, creating holes and wide cracks around the base/root ball of the tree. These open spaces in the soil can expose the fruit tree’s tender roots to air ultimately drying them out, causing the tree to stress and negatively impacting the health of the tree.How to Plant a Fruit TreeHubby and I try our best to secure the tree trunk to the support near the base of the tree and toward the top to make certain the tree is secure. Sometimes we’ll just tie it towards the top of the tree. Use your best judgment.

How to Plant A Fruit TreeFor those of you worried about girdling, no worries. Once the tree starts to leaf out, you will need to check the ties to make sure they are still firmly in place but not choking the dickens out of the tree trunk. At that time you may need to loosen the tie a bit. Our trees grow extremely well using our planting and care methods and typically have well established roots, and a nice sized trunk and canopy by the end of the season. Because of this, we typically loosen the ties at this stage to give them some breathing room.

With the fruit tree firmly in place, your helper can finally let go of the tree and lend a hand in the final planting process. 😀  Before you begin covering your roots with soil and filling the hole, you’ll need to add some amendments (see next step). Just remember to keep your roots wet. You can also begin adding some water to the planting hole just underneath the root ball to help the soil settle under the roots.

What if you’re planting two or more fruit trees in one hole? Simple. Just follow the steps above leaving 18″ between each tree ~ plenty of room for both to grow. For holes where you plan to plant four or more trees in, you will need a much wider hole than the 3-feet I recommended to you. Use the 18″ spacing as a guide.

Two Fruit Trees in One Hole

Step 4 ~ Add Amendments & Soil

Now, with your fruit tree firmly in place, it’s time to add the amendments to get your fruit trees off to a great bionutrient start. For those of you who dug their planting holes and prepared the soil with amendments in the fall, feel free to follow the instructions below. Adding a few more amendments at this time can be of benefit to the tree and soil.

With the bare root fruit tree roots exposed and moist (I know I keep repeating myself but it’s that important), sprinkle a high quality endo mycorrhizae inoculant directly onto the bare roots (check the package for the recommended quantity ~ it’s usually about a tablespoon per fruit tree). An important thing to mention here is that in order for the mycorrhizae to perform its symbiotic magic, it’s best if the inoculant makes direct contact with the roots.

Next, sprinkle over the roots about 1 cup of bone meal and a portion of each rock dust (about 1/2 cup or so).

With those amendments in place, go ahead and begin covering the roots with the 50/50 soil mix making certain to water in the soil as you go. Add the water from the side of the root ball to try to prevent too much of the mychorrhizae inoculant from becoming dislodged from the roots. Once the roots are completely covered with soil, sprinkle an additional cup of bone meal over the area as well as another small portion of the rock dusts. Wet down the soil as usual. Refrain from tamping down or stepping on the soil as you fill the planting hole.  Adding water will naturally (and perfectly) compact the soil.

How To Plant A Fruit Tree In The Desert

When the hole is just about filled with soil (about 4″ from the top), stop watering the soil and sprinkle around what’s left of the rock dusts. Also, be sure to sprinkle and mix in some of the rock dusts into what’s left of the 50/50 soil mix you will be using to fill the rest of the planting hole. If you’re adding the Alaska Humus and/or Worm Castings, now is the time to broadcast it onto the soil, mix it in and finish filling the hole ~ remember avoid tamping down or stepping on the soil.

As a final step to filling the hole, we leave the top few inches of soil dry and then level the soil surface within the entire planting area by scraping a 4′-6′ long piece of flat wood across the surface. This step is optional, but it really helps to finish things off for those with OCD challenges 😀

How To Plant A Fruit Tree In The Desert

How To Plant A Fruit Tree In The Desert

How To Plant A Fruit Tree In The Desert

Step 5 ~ Build a Water Basin

With the fruit tree planted and the planting hole completely filled with soil and leveled, it’s helpful to build up a water basin barrier around the entire perimeter of the original planting hole for deep soaking.  This is where setting aside two to three 5-gallon buckets full of your 50/50 soil mix comes in handy.

Using your hands, mound up a 3-feet in diameter ring of 50/50 soil mix around the base of the fruit tree, firming the mound as you go along. To finish off the soil ring, I like to mist it with water to make it hold together better. As long as you avoid blasting the water basin ring with water, it should hold in place nicely for the entire year.

How To Plant A Fruit Tree In The DesertOnce the water basin is watered in well several times, a natural “water basin” (a.k.a. slight bowl) will form as the soil settles a bit. This is a good thing. As you know, water in the desert is a precious resource and taking advantage of mother nature’s gift any way we can is ideal. Plus, the water basin allows us to deep water our trees focusing the water at the root zone and avoiding wasteful run off. With deep soaking, the water will soak in and penetrate out into our native soil. Planting a fruit tree into a mound of soil or in an elevated planter is far from ideal in our hot and arid climate and can ultimately lead to more frequent watering ~ and wasting our precious resource.

Step 6 ~ Water Your Newly Planted Fruit Tree

Shortly after finishing the planting process and building the water basin, it’s important to water in your newly planted fruit tree. To do this, simply place the end of your hose into the water basin and turn the water on to a gentle low stream and let it slowly fill the water basin to the top with water. Your goal is to allow the water to slowly soak down deep vs. filling the water basin quickly.

As your water basin is filling, take note of any areas that may be low or high. This is especially important if you have more than one tree in the planting hole. The goal is to water the tree(s) evenly versus the majority of the water traveling or settling to one side. To fix this, simply add a little more 50/50 soil mix to any low spots until you see the water filling more evenly within the water basin.

How To Plant A Fruit Tree In The DesertHow To Plant A Fruit Tree In The DesertOnce the water reaches near the top of the water basin barrier, turn off the water and let it completely soak in.

In one hour, repeat the watering process above. When the water basin soaks in the 2nd time, be sure to check that no roots have been exposed. If they are, simply add a little bit more 50/50 soil mix to cover them.

When the second watering is soaked in, repeat the watering process one final time that same day. After this initial triple soaking, plan to water your newly planted fruit tree 3x per week until the tree has a nice flush of new growth (typically by March/April), then you can back off the watering to about 2x per week until summer. Then you will need to go back to watering 3x per week.

After a few days of watering your new tree, you may notice some cracking on the soil surface. If these do appear, especially cracks around the root zone area which can dry out the roots, simply add a little more 50/50 soil mix to the area to fill the cracks.

Also, take care to avoid a breach in the water basin wall by timing your water sessions properly. Too long and the basin will definitely overfill and breach ~ yikes! I like to hand water my baby fruit trees with a hose until they get settled in. Basically, I set the hose within the water basin, turn the water on to a gentle low stream and let it soak in for about 10-15 minutes or so (about 10-15 gallons). Just keep an eye on it to avoid a breach.

Step 7 ~ Now The Hard Part

Unless there’s an abundance of space in which to grow your fruit trees to full size (about 20 to 25 feet high/wide), you will more than likely need to actively manage the size of your tree’s growth in order to keep things tight and tidy to ensure a wee bit of wiggle room. This means maintaining fruit trees at a reduced height and width than they would normally grow and is quite a normal practice for a lot of residential orchards. There are a few options to keeping your tree’s growth “in control”.  One way is to espalier the fruit tree along a wall or support and keeping it well pruned. Another way is to prune the fruit tree as a small maintainable bush. My favorite way to keep my orchard manageable is to keep them “ladderless”. This means maintaining the tree’s top growth to a height that does not require a ladder to harvest. For most, this is about 6-feet high. 7-feet if your tall, like hubby and I.

The first step to maintaining a fruit tree as ladderless is to encourage low branching so that any fruit harvesting activity will take place anywhere from about knee height to about 6-feet high. Initially, this requires a bit of bravery on your part.

Now comes the hard part. In order to encourage this ideal low branching it requires one to suck it up and ignore any “existing perfect fruit tree branching” and…

Chop…

How To Plant A Fruit Tree In The DesertThat…

How To Plant A Fruit Tree In The DesertTree…

How To Plant A Fruit Tree In The DesertMaking this initial single heading cut along the trunk of the fruit tree will set the stage for future growth of a ladderless open vase-shaped fruit tree. A word of caution. When you make that initial cut, just be certain it’s at a height you can live with down the road. We used to cut our trees at exactly knee height and after some time, found this to be a bit too low for us tall folk. In order to harvest the literal low hanging fruit, it requires us to get on hands and knees and scootch along the ground. In some cases, actually lay down in order to harvest the low interior fruit getting up close and personal with our soil aerating fire ants. Quite sub-optimal. Besides the occasional itchy painful fire ant bite, we also feel like a bit of a contortionist at times to harvest. So just keep this in mind when making that initial cut.

A key point to note here is that when making that initial heading cut, it’s the cut that helps you to determine where the first layer of new fruit-bearing branches will emerge. This new branching structure will appear within 6-8-inches below the heading cut. Knowing this should help you to determine where you want to make that first cut. Also, when making that initial cut, some folks like to make a straight cut, others a 45 degree cut facing down and away from a bud. Whichever you choose, be sure to make that initial cut about 1-inch to 1-1/2-inches above a bud to begin training your tree to form an open vase shape and to allow for any die back immediately below the cut. When die back does occur, if the cut is too close to a bud, you risk losing the bud as well.

As your tree begins to leaf out and become established in the orchard, the results of that initial cut will become quite apparent and sets the stage of forming an ideal open vase shape which allows optimum airflow and sunlight penetration into the future canopy of the fruit tree for awesome fruit color and flavor.

Another goal of that first heading cut is to encourage the tree to form a solid branching structure to help support future fruit harvests. Think of a bicycle wheel. In a perfect world, the spokes (a.k.a. branches) will be evenly spaced around the tree. That is if mother nature cooperates. As your tree forms its new structure, let it grow. Refrain from scratching off or cutting off growth within the 6 to 8-inches (plus a few extra inches just in case) below the cut. You’ll be choosing your future scaffolds at the end of the first year. In a future post, I’ll explain how to care for your baby fruit tree during its first year to include pruning. So for now, make the cut, sit back and watch God’s glorious work firsthand as your tree begins to grow and leaf out.

Up next

My next post will be all about what to do for your newly planted fruit tree(s) 1-week after planting. I’ll explain how to protect your tree from the elements (and critters) as well as kick off our preferred first year’s maintenance program. Keep a look out for this important post. Happy planting!

God Bless,

AG_Signature_Color_Transparent

 

 

Protected by Copyscape Online Plagiarism Finder

2 Comments

Filed under Fruit Tree How To Series, Fruit Trees/Orchard

December Orchard Tasks

 

December Orchard TasksHi friends!

December is the month when I can finally pause for a moment, take a step back and breathe. With my orchard tools cleaned and stored away, it’s also the perfect time to take stock of my fruit orchard’s productivity for the past year, take a closer look at challenges I encountered, and reflect upon the successes.

Home Fruit Orchard

2014 was definitely a productive year. Only a few quick flips of the pages in my orchard fruit harvest record book is enough to reconcile my memory of last year with the actual harvest numbers. Not to brag or anything, but my fruit trees ROCKED their first full year of production. Only three years old and such abundance! Well done, trees! Well done.

Eversweet Pomegranate

Bees and Pomegranates

As I sit here in awe, I feel compelled to give thanks. Thanks to God for blessing us with such wonderful fruit trees and a place to plant them. Thanks for the phenomenal increase in nutrition that was easily confirmed by the brix numbers I recorded this past year. Thanks for the health of my fruit trees, soil, and abundance of good soil bacteria that was confirmed through soil testing. Thanks for all the wonderful natural healthy amendments that made my fruit tree and soil health possible and for the resources to obtain them. And thanks for the abundance in my life and for you, my wonderful friend and faithful blog follower.

Flavor Delight Aprium

So can you guess the first task item for the month of December? o_O

  • Take time to reflect on the abundance in your orchard, garden and life. And by all means ~ give thanks
  • Review your orchard’s harvest record and journal.
    • Identify the challenges faced throughout the season in addition to your successes and develop a strategy to resolve/address the challenges in the upcoming season.
    • Estimate next year’s harvest dates, jot down your goals, and develop a strategy to achieve your goals.
  • Make a “leaf storage bin” using wire mesh to form a barrel-shape then anchor it to the ground. Any leaves you collect this fall/winter will come in handy for use in homemade compost and/or for making rich humus in early spring.

Chojuro Asian Pear

  • Begin putting together your Orchard Harvest Record pages for the next harvest season, now. When January comes along, you’ll be hitting the ground running again.
  • After the fruit trees have dropped most of their leaves, start removing any mummified fruit.
  • Irrigation ~ reduce watering to every 7-10 days.
  • Continue to pick up any fallen fruit ~ that is, if you’re still harvesting fruit.
  • Fruit you could be harvesting this month:
    • Pecan
    • Persimmon
    • Citrus (lemons, mandarins, etc.)

Fruit tree in fall

  • The cold and frosty weather is here! Be prepared to protect your frost sensitive trees at a moment’s notice. Frost sensitive trees include most citrus, avocados and other exotic sub-tropical fruit trees. It’s also important to keep an eye on your trees throughout the winter months to ensure that your chosen frost/freeze protection solutions continue to work for you and your trees. For frost/freeze protection ideas, be sure to review last month’s task list.
  • Protect sprinkler/bubbler heads, waterlines, hoses and spigots from freeze damage.
  • Spray a microbial inoculant on fallen leaves ~ when 50% of the leaves have fallen off your fruit trees, spray the ground underneath each fruit tree as well as the bottom portion of each trunk with either a fresh brewed microbial tea or by using a mother culture. Be sure to target fallen leaves on the ground to help populate the area with microbes and facilitate leaf decomposition (making a wonderful rich humus for your trees, to boot!).

Flavor Delight Aprium leaves

  • FYI ~ the first day of Winter is December 21st @ 6:03 PM EST
  • Sit back, put your feet up and enjoy the Christmas holiday with your family and friends!

Give yourself the gift of health… plant a fruit tree next spring!

God Bless,

AG_Signature_Color_Transparent

 

 

Protected by Copyscape Online Plagiarism Finder

8 Comments

Filed under Monthly Task Calendar

Weeping Santa Rosa Plum

Bumble Bee on Santa Rosa Plum flowerHi friends! Today I thought I would highlight one of my backyard orchard fruit trees… my Weeping Santa Rosa Plum. Of all my fruit trees, this one stands out from the rest not only because of its stately manner but for its beautiful weeping structure. In full bloom, the tree looks like it’s covered in a soft blanket of pure white snow. The tree also lights up in early summer with luscious burgundy color as the fruit begins to ripen. Fruit ripens on the tree at different times displaying a gorgeous contrast of colors which is especially eye-pleasing.

In the Beginning

I’ve mentioned this story before, so I’ll just highlight a couple of important events.  One was the fact that we joined up with an organic gardening group just weeks prior to our first bareroot fruit tree pre-order.  And two, joining the group and the events that quickly followed catapulted our long-time orchard dream into reality.

The first meeting we attended was actually a presentation about growing fruit trees in our area by horticulturalist Bob Morris, who at the time headed up the UNCE Test Orchard project in North Las Vegas. At this presentation, a list of recommended fruit trees was provided and reviewed in great detail. It was also mentioned that the group was putting together a bulk fruit tree order that would come directly from Dave Wilson Nursery in California. The best source for quality fruit tree stock. The timing and valuable information couldn’t have been more perfect. God’s divine inspiration. That’s the moment we knew our orchard was meant to be.

Upon receiving our order, we were quite fortunate to acquire the most beautiful plum specimen for planting in our long awaited orchard. Our baby Weeping Santa Rosa Plum stood about 6 feet high with about a 1-1/2-inch to 2-inch diameter trunk. Lower down the trunk was a bit thicker. The tree also had a handful of arching branches coming straight off the top.

I have to admit that we were a little intimidated by the tree at first.  It was so different from all the other trees and it obviously would require a much different approach to the initial cut at planting. This initial heading cut is especially important for those planning to keep their fruit trees ladderless (i.e., low enough to gather fruit by hand without using a ladder).Weeping Santa Rosa PlumWhen planting our other baby fruit trees, we lopped off their tops leaving the trees at a height of about 36” high or so. Keep in mind that if we had purchased a regular Santa Rosa Plum we would have made the initial cut in the same manner. But, when it came to our Weeping Santa Rosa Plum we were very hesitant in doing this. Especially since we had very little to no instruction or information on how to approach that first cut on this type of fruit tree. So to be safe, we left the tree pretty much as is and removed only a few small branches coming off the center of the tree, which were sticking straight out at eye level and a potential “eye-poke” hazard.

As I stand here today three years later, gazing upon my beautiful Weeping Santa Rosa Plum and its beautiful long weeping branches, I’m so glad we decided to keep the original height and had sense enough to leave those baby arching branches in place to grow. Today, the branches have plenty of room to weep downward toward the soil’s surface and is the perfect tree for Pinny to shade herself while I’m tending to the orchard.

Weeping Santa Rosa PlumWithin a few short weeks after planting, the new leaves appeared followed by a small handful of flower buds shortly thereafter. At bloom, we received a very nice preview of snow white plum flowers that we would definitely admire more of in the very near future. Weeping Santa Rosa PlumWith consistent regular watering, no additional pruning, and two applications of the John & Bob’s suite of products that first year, our Weeping Santa Rosa Plum was definitely on its way to being the healthy beautiful fruit tree it is today 🙂Weeping Santa Rosa Plum

2nd Year

During the second year, my fruit orchard was kind of on its own with minimal attention due to my health issues. In January that year, just before the onset of my illness, hubby and I were able to attend several extremely informative pruning demonstrations by horticulturalist Bob Morris at the UNCE Test Orchard in North Las Vegas. Then, just a few short days after pruning and white washing all of my own fruit trees, I became critically ill.

For the next year-and-a-half, my physical activity was extremely impaired and hubby had his hands full taking care of me and the household. During this time, I mustered up the energy to take notes of important events in our orchard, take a number of photos and write a small handful of blog posts. I think doing these few tasks gave me a wee bit of normalcy in my life. A really good thing.

As for maintenance that year, it was pretty basic… regular watering (using a hose), one application of iron (EDDHA) and two applications of the John & Bob’s products. Thinning the fruit and harvesting was very minimal since our fruit trees were still small.

By the end of the second year, with just the basic care, my young spindly Weeping Santa Rosa Plum emerged into a gorgeous statuesque tree with a trunk that nearly tripled in size.

All of our fruit trees were champs that year and weathered our medical storm (so to speak) with flying colors! A testament to their health and our loving dedication.

3rd Year

Our Weeping Santa Rosa Plum’s (and orchard’s) third birthday. While tending to my pruning and white washing tasks this past February, we had a decision to make regarding our plum tree. Early last year, I noticed a few “wild hairs” (branches) growing straight up at the top of my plum tree. With everything going on that year we just left it alone.

By the beginning of this year, those upward growing branches had grown a lot and turned out to be really nice potential producers with small fruiting spurs all up and down the branches. Something I definitely wanted to preserve.

Weeping Santa Rosa Plum

Weeping Santa Rosa PlumSo, rather than prune these branch beauties off, we decided to reel them in by carefully tying parachute rope onto the branches and staking it down securely into the ground. This has really helped to maintain the tree’s shape very nicely.

Fruit Tree Tie DownFruit Tree Tie DownWeeping Santa Rosa PlumWeeping Santa Rosa PlumYummy Plums!

I really cannot say enough nice things about this tree and its fruit. Besides being super sweet and delicious, the color of the fruit is just stunning.

Weeping Santa Rosa PlumWhen considering the Weeping Santa Rosa Plum or the standard Santa Rosa Plum tree, keep in mind that these plums have fruit spurs. These spurs are the points at which the flower blossoms will appear and then the fruit. For the most part, these spurs will last the life of the tree producing fruit year after year. Because of this fact, every effort should be taken to protect them from being damaged or worse yet, removed! Once a fruit spur is removed, it will never grow back. Ever. This is the reason I take it upon myself to do the bulk of the harvesting. Don’t get me wrong… hubby does a fine job harvesting, too, but is usually pretty busy working on other tasks in the garden or around the house and will help out when there’s a large haul. It’s more a rule for when others come to visit our property, especially during harvest time. No unsupervised picking of fruit on this tree please 😀

Weeping Santa Rosa PlumMind you, these spurs can take quite a bit of beating and will eventually cover the branches from top to bottom with their beautiful presence. Personally, I’m just a little over protective of my trees.  Okay, maybe super over protective.

Plum fruit spurFor those faint of heart, know this. You will have some spur loss over the life of the tree and in most cases, it will be by your hand! It’s inevitable and so easy to do, especially while harvesting deep inside the interior of the tree. Either a shirt sleeve will get caught or a pant leg and as you pull away you take out one or two fruit spurs. Or as you’re picking fruit, you sort of pick off the fruit along with the spur and leaves. Ooops. Been there done that. Just don’t sweat it. It happens to the best of us.

Weeping Santa Rosa Plum

Pests

The Weeping Santa Rosa Plum and plums in general, typically do not have a lot of pest problems, but they can be vulnerable to wood borers. So keep a watchful eye on main scaffolds, the trunk and the crotch areas.

Plum fruit can also be a target for thrip damage. To date, I’ve only seen some slight damage, not much, unlike my nectarine which gets lots of thrip damage each year. Thrips love nectarines! I’m not sure if they’ll go after my Nectaplum fruit, which is a cross between a nectarine and a plum. Only time will tell.

To date, our biggest “plum” threat has been from birds. The plum tree comes in second for the most bird damage. As soon as the fruit starts to change from green to burgundy, the birds start-a-peckin’ and it only gets worse as the color deepens. With our fruit orchard in full production this year, we’ve seen a lot more bird damage on all of our fruit tree’s fruit, but the bird’s favorites are still our fig and our plum. It’s just something about these fruits they just love.

Weeping Santa Rosa PlumTo help keep the bird damage down to a minimum, we starting installing our bird netting frame. I’ve never seen more frustrated birds in my life. Several birds, mostly finches and mocking birds, will gather at the top of the frame making their disapproval known to all who will listen.  They’ll test the netting in several places before giving up and flying away. It’s especially entertaining for us and an easy target for Pinny to bark at and shoo them away. Pinny agrees!Weeping Santa Rosa PlumWell, I’m sure I can go on and on about my wonderfully productive plum tree, but I’ll spare you the “my child does this or that stories”. So, before you go, I’ll share with you a few photos of the interior of the tree and provide a few quick stats.

Weeping Santa Rosa PlumWeeping Santa Rosa PlumWeeping Santa Rosa PlumWeeping Santa Rosa Plum

Quick Stats

Harvest Stat

Chart_Harvest_2014_Plum

Weeping Santa Rosa Plum Stats

Chart_SantaRosaPlum_Stats

Weeping Santa Rosa Plum

Until we chat again!

God Bless,

AG_Signature_Color_Transparent
Protected by Copyscape Online Plagiarism Finder

 

12 Comments

Filed under Fruit Trees/Orchard